Printronix P8000 Series Cartridge Ribbon Printer - Manual (Page 107)

Ethernet Params
107
Ethernet Params
The Ethernet Params menu helps your printer communicate on a network.
For information on assigning the IP Address, Gateway Address, Subnet
Mask, and MAC Address, refer to the
Network Interface Card User's Manual .
ASCII Data Port
This option sets the port number for ASCII print jobs. The data port number
needs to match your host system setting.
• 9100 (factory default)
• 1025 - 65535
IPDS Data Port
This option allows you to set the port number for IPDS print jobs only if the
IPDS option is installed.
• 5001 (factory default)
• 1025 - 65535
Keep Alive Timer
This is the time that the Keep Alive Timer will run. With the Keep Alive Timer
on, the tcp connection will stay connected even after the print job has
terminated.
• 3 Minutes (factory default)
• 0 - 10 Minutes
Ethernet
Params
(from page 105)
* = Factory Default
1 If installed.
ASCII
Data Port
Ethernet
Speed
9100*
1025 - 65535
Auto Select*
10 Half Duplex
10 Full Duplex
100 Half Duplex
100 Full Duplex
Keep Alive
Timer
3 Minutes*
0- 10 Minutes
Job Control
Standard*
Enhanced
Fast Standard
Off
IPDS Data
Port
1
5001*
1025 - 65535
Offline
Process
Disable*
Enable