Printronix P8000 Series Cartridge Ribbon Printer - Manual (Page 231)

SURE SCAN Submenu
231
Downloaded Fonts
Allows you to download a substitution table to replace any character in the
current character set with a different character in the same font.
The Downloaded Fonts menu applies to both LP+ Bitmaps and IGP Block
downloaded characters. For example, performing a Delete from Flash option
deletes both Bitmap and Block downloaded characters from flash memory.
• Char Operations . Allows you to delete a character from flash, load a
character from flash, save a character to flash, and delete a character
from RAM.
• Ld Char at Pwrup . Allows you to disable or enable loading a character at
power up.
• Set Operations . Allows you to delete a character set from flash, load a
character set from flash, save a character set to flash, and delete a
character set from RAM.
• Ld Set at PwrUp . Allows you to disable or enable loading a character set
at power up.
NOTE: This option is not available in the PCL-II or LG emulation.
• DBCS Download . Allows you to save and delete downloadable DBCS
characters from flash.
• Save to Flash . Saves the downloaded characters from the DRAM to
FLASH memory. These characters can be automatically reloaded when
the printer powers on. The saved file name is “dbcsdwn”. The characters
need to be in the DRAM prior to saving into FLASH memory by using any
download commands.
• Delete DL. Font . Deletes the “dbcsdwn” file. The downloaded
characters will no longer reside in FLASH memory on subsequent power-
ups.
PMD (Paper Motion Detection) Fault
• Enable (factory default). In the event of a paper jam, an audible alarm
beeps, “CLEAR PAPER JAM” appears on the message display, and the
printer stops printing.
• Disable . You should disable PMD only if special paper requires it.
CAUTION Once PMD is disabled, paper motion is not monitored. If a paper jam
occurs, the printer ignores the condition and continues to print,
possibly causing damage to the printer.
Power Stacker
This parameter allows you to enable or disable the power paper stacker
(provided this option is installed).