TROY Group MICR_IRD 9000 1UP MICR Printing Solutions User’s Guide - Manual (Page 99)

Section 6 Using the Printer Control Panel
MICR Solutions User’s Guide -- Document #50-70341-001 Rev. F
6-1
Introduction
Security
Many of the TROY printer features provided in the TROY Printer Utility can be configured through the printer
control panel as a secondary point of control. For security purposes, an administrator password is required before
access to the TROY printer features is allowed. Refer to the menu maps shown below to select, setup or
configure the TROY features available through the printer control panel.
An administrator password is used within the TROY MICR printers to secure the MICR printer features and
settings. The printer uses a permanent default user name (ADMIN) that cannot be deleted or modified, however,
the administrator password can be modified using the TROY Printer Utility or the printer control panel. The
administrator default password is blank (no password), however, administrators are encouraged to setup a unique
password to restrict access to the TROY MICR printer’s features and settings. After an administrator password is
set, all standard Hewlett-Packard printer features normally available through the printer control panel will remain
accessible to anyone without entering a password.
Although the administrator password can be set via the printer control panel, TROY strongly recommends using
the TROY Printer Utility to select or modify the administrator password. The TROY Printer Utility will
automatically update the printer’s administrator password whenever the password is changed in the printer utility.
However, changing the administrator password at the printer control panel will not update the TROY Printer
Utility password in the host computer (no bi-directional communication). The printer’s administrator password
and the TROY Printer Utility password in the host computer must be identical in order to access the printer
features through the TROY Printer Utility.
NOTE: As a security enhancement, the TROY MICR 4100 series printers will only allow numeric passwords to be
entered via the printer control panel. If you set or enter the administrator password via the printer control panel
instead of the TROY Printer Utility, you must choose a suitable numeric password (no letters).
NOTE: If you plan to use the TROY Printer Utility exclusively to set or enter the administrator password
(recommended), then both letters and/or numbers may be used for the administrator password.