TROY Group MICR_IRD 9000 1UP MICR Printing Solutions User’s Guide - Manual (Page 48)

Section 4 Using the TROY Printer Utility
MICR Solutions User’s Guide -- Document #50-70341-001 Rev. F
4-1
Introduction
The TROY Printer Utility is an easy-to-use Microsoft Windows-based utility designed to assist the administrator
with the configuration and management of a TROY MICR printing solution. The TROY Printer Utility allows
the system administrator to perform the following functions:
• Manage audit reports
• Set names and passwords
• Set printer security options
• Manage printer resources
• Re-map printer paper trays
• View system information
• Enable/disable printer type
• Check MICR print quality
• Print MICR demo pages
• Obtain technical support
• Access the TROY web site for printer
firmware updates and product information.
The TROY Printer Utility is intended for use by system administrators and should be installed only on the
administrator’s computer. All printer settings including names and passwords selected with the TROY Printer
Utility will remain unchanged until modified by the administrator, even if the printer power is cycled or the
printer electronics are reset. For a detailed description of the TROY MICR printing solution features, refer to
Section 2 –
Understanding TROY’s Features . The TROY Printer Utility is included on the TROY MICR Printing
Solutions CD supplied with your TROY MICR DIMM or TROY MICR series printer. Follow the instructions in
the TROY Quick-Start Guide to install the TROY Printer Utility.
NOTE: The TROY Printer Utility sets the printer defaults for all users; however, individual users can use the TROY
Port Monitor to temporarily override some of the printer default settings on a job-by-job basis.