TROY Group MICR_IRD 9000 1UP MICR Printing Solutions User’s Guide - Manual (Page 25)

Section 2 Understanding TROY’s Features
MICR Solutions User’s Guide -- Document #50-70341-001 Rev. F
2-12
Printer Type and
MICR Mode
(cont.)
Printer Type Feature Description Security
Level
MICR Off
(timeout)
(MICR Secure
Printers Only)
The default MICR mode is DISABLED. The printer will always default to MICR
disabled when powered ON. The printer will automatically reset to MICR disabled
at the end of each print job or after a set amount of time has elapsed after the print
job has finished. When MICR mode is enabled via a software command, the TROY
MICR toner sensor will verify that a TROY MICR toner cartridge is present
whenever a TROY MICR font is used. If MICR mode is disabled and an attempt is
made to use a TROY MICR font, an alternate font will automatically be substituted
for the MICR font. High
MICR Off
(MICR Secure
Printers Only)
The default MICR mode is DISABLED. The printer will always default to MICR
disabled when powered ON. If MICR mode is disabled and an attempt is made to
use a TROY MICR font, an alternate font will be substituted for the MICR font. If
MICR mode is enabled, the TROY MICR toner sensor will verify that a TROY MICR
toner cartridge is present whenever a TROY MICR font is used. If MICR mode is
set to enabled, the printer will remain in this mode until explicitly changed to MICR
disabled. Medium-High
MICR Always The default MICR mode is ENABLED. The printer will always default to MICR
enabled when powered ON and the MICR toner sensor will continuously verify that
a TROY MICR toner cartridge is present in the printer. If MICR mode is disabled
and an attempt is made to use a TROY MICR font, an alternate font will
automatically be substituted for the MICR font. If MICR mode is disabled, the
printer will remain in this mode until explicitly changed to MICR enabled. Medium-High
MICR On The default MICR mode is ENABLED. The printer will always default to MICR
enabled when powered ON. The TROY MICR toner sensor will verify that a TROY
MICR toner cartridge is present whenever a TROY MICR font is used. If MICR
mode is disabled and an attempt is made to use a TROY MICR font, an alternate
font will automatically be substituted for the MICR font. If MICR mode is disabled,
the printer will remain in this mode until explicitly changed to MICR enabled. Medium
Hardware
Settings The default MICR mode is set at the factory. The printer will be preset at the factory
to one of the four printer types listed above by configuring the hardware switch
settings on the TROY MICR DIMM (Dual Inline Memory Module) installed in the
printer. The hardware settings can be overridden by using the TROY Printer Utility
to override the current printer type to suit the requirements of your MICR printing
environment. (Variable)