TROY Group MICR_IRD 9000 1UP MICR Printing Solutions User’s Guide - Manual (Page 105)

Section 6 Using the Printer Control Panel
MICR Solutions User’s Guide -- Document #50-70341-001 Rev. F
6-7
Using the
Exact
Positioning
Technology
(cont.) T O ADJUST THE POSITION OF THE MICR LINE
1. If not already logged into the printer control panel, enter a valid
administrator password ( see page 6-2 ).
2. Press the Menu button forward until the
TROY SETTINGS MENU
appears
(MICR 4100 control panel shown here).
3. For horizontal MICR line position adjustments, press the Item
button forward until MICR ADJUST X, DECIPOINTS +0 appears. For
vertical MICR line position adjustments, press the Item button
forward until
MICR ADJUST Y, DECIPOINTS +0 appears.
4. Press the Value button forward or backward to select the desired
decipoint offset value (-720 to +720). Each decipoint is equal to
1/720th of an inch.
5. Press the Select button to save the decipoint selection. Repeat steps three through five until all the desired
decipoint offset values have been entered.
6. Print a test page to evaluate the MICR line position adjustment. Repeat the adjustment as necessary. Use the
TROY MICR Document Template to verify all MICR line adjustments.