TROY Group MICR_IRD 9000 1UP MICR Printing Solutions User’s Guide - Manual (Page 138)

Section 8 Troubleshooting / Error Messages
MICR Solutions User’s Guide -- Document #50-70341-001 Rev. F
8-1
Trouble-
shooting by
Symptom
The following troubleshooting table provides solutions to the most common MICR printing problems. Some of
the messages may not apply to your TROY MICR printing solution. Visually inspect your MICR documents
using the TROY MICR Document Template where appropriate.
NOTE: This table does not cover all of the ANSI and banking specifications that MICR-encoded documents must
meet. Refer to the TROY MICR Basics Handbook for more information on MICR specifications and check design.
NOTE: Information on formatting and printing of image replacement documents (IRDs) is described in the
American National Standard for Financial Services X9. 100-140-2004 Specification and is available on the ANSI
(American National Standards Institute) web site (
www.ansi.org ).
Condition Possible Cause Solution
Incorrect data in MICR line (account
#, bank #, etc.).
Error typing in the account #, etc.
Re-enter the correct data.
Incorrect format of fields in MICR line
(according to your bank’s
specifications).
Error typing in the field information.
Re-enter the correct data. Ask your
bank for its specification sheet or copy
the field format from your old checks,
including any spaces.
Vertical streaking or smearing
throughout document.
Problem with TROY MICR printer or
toner cartridge.
Refer to the troubleshooting section in
the printer user’s manual.
Horizontal streaking in MICR clear
band during document processing.
Problem with the reader/sorter
machine.
The reader/sorter machine must be
cleaned and checked or adjusted.