TROY Group MICR_IRD 9000 1UP MICR Printing Solutions User’s Guide - Manual (Page 92)

Section 5 Using the TROY Port Monitor
MICR Solutions User’s Guide -- Document #50-70341-001 Rev. F
5-3
Installing the
TROY Port
Monitor
Accessing
the TROY
Port Monitor
To install the TROY Port Monitor, ensure that the appropriate printer drivers are installed first, and then install
the port monitor (follow the instructions described in the
Quick-Start Guide ). The TROY Port Monitor software
is located on the TROY MICR Printing Solutions CD supplied with your TROY MICR printing solution.
The screens required to access the TROY Port Monitor differ slightly between the Windows operating systems
supported by the TROY Port Monitor (Microsoft Windows 95, 98, 2000, ME, and NT4.0). Once the TROY Port
Monitor is accessed, the screens within the TROY Port Monitor will appear identical across all Windows
operating systems.
T O ACCESS THE TROY PORT MONITOR IN W INDOWS 95:
1. Click on Start, Settings, and then
Printers.
2. Right-click on the desired TROY
MICR printer icon, and then left-
click on Properties.
3. Click on the Details tab. Select
the desired printer driver and port
that corresponds to the TROY
MICR printer being used, and
then click on Port Settings to
access the TROY Port Monitor.