TROY Group MICR_IRD 9000 1UP MICR Printing Solutions User’s Guide - Manual (Page 60)

Section 4 Using the TROY Printer Utility
MICR Solutions User’s Guide -- Document #50-70341-001 Rev. F
4-13
Re-Mapping
Printer Paper
Trays (cont.) The following table contains common tray mapping numbers for TROY MICR printers. Due to the Hewlett-
Packard tray assignment scheme, the actual tray number embossed on the paper tray(s) of your MICR printer may
not correspond with the factory tray assignment numbers listed in the table below (e.g., physical tray #2 has a
factory tray assignment number of 3, etc.). Always use the factory tray assignment numbers (listed in the table
below) when re-mapping your printer paper trays using the TROY Printer Utility.
Factory Tray Assignment Numbers
Physical Paper Source (Media) 2200
Printer
4100
Printer
8150
Printer
9000
Printer
Paper Tray 1 (manual feed) (optional for 9000 series printers) 4 4 4 4
Paper Tray 2 1 1 1 1
Paper Tray 3 5 5 5 5
Paper Tray 4 (Optional item for all printers) n/a 8 20 20
NOTE: For information on setting up the TROY IRD 9000 1 UP series printer paper trays, refer to the Appendix.