TROY Group MICR_IRD 9000 1UP MICR Printing Solutions User’s Guide - Manual (Page 142)

Section 8 Troubleshooting / Error Messages
MICR Solutions User’s Guide -- Document #50-70341-001 Rev. F
8-5
Trouble-
shooting by
Symptom
(cont.)
MICR characters are too thick or too
thin.
Printer density setting is too dark or
too light.
Your MICR toner cartridge is nearly
empty.
Your MICR paper is out of
specification so that toner does not
adhere properly to the paper.
Faulty MICR toner cartridge.
Use of Non-TROY MICR toner or font.
Use TROY MICR defaults.
TROY MICR toner cartridge should not
be used if a
LOW TONER message
appears on the printer control panel
display. (There should be no visual
fading across the document).
Refer to TROY MICR paper
specifications elsewhere in this guide
and consult your paper vendor to
ensure you have the correct paper
(including correctly preprinted
background areas). Also, check to
ensure your paper has not altered due
to environmental conditions during
storage and handling.
Try another TROY MICR toner
cartridge. If the cartridge is faulty,
return to dealer.
Try TROY MICR toner or font or
consult non-TROY manufacturer for
assistance.