TROY Group MICR_IRD 9000 1UP MICR Printing Solutions User’s Guide - Manual (Page 79)

Section 4 Using the TROY Printer Utility
MICR Solutions User’s Guide -- Document #50-70341-001 Rev. F
4-32
Identifying Print
Defects Continuous streaks and voids that may
appear on the Print Quality Document
are usually the result of a low toner
condition. A scratch or other
contamination on the surface of the
optical drum inside the toner cartridge
can also cause streaking and other print
quality defects.
To ensure optimum MICR print
quality, always use a genuine TROY
MICR toner cartridge with your MICR
printer. Always replace the TROY
MICR toner cartridge with a new
TROY MICR toner cartridge when the
TONER LOW
message appears on the
printer control panel display. MICR
documents printed after a low toner
condition may not meet MICR
specifications and cause your printed
checks to be rejected, thereby incurring
significant manual processing fees to
you by your bank.
NOTE: If your MICR printer develops a
noticeable print quality defect that
cannot be corrected by replacing the
MICR toner cartridge, the Print Quality
Document can be sent to TROY
Systems for evaluation. Do not
continue to print MICR documents if
print defects are present.