TROY Group MICR_IRD 9000 1UP MICR Printing Solutions User’s Guide - Manual (Page 18)

Section 2 Understanding TROY’s Features
MICR Solutions User’s Guide -- Document #50-70341-001 Rev. F
2-5
Pre-defined
Security States The following table describes the general pre-defined set of security states built into the TROY MICR solutions.
) Secure EX Series Printers Only
MICR Printing Solutions Feature Required Security State
(MICR Series Printers)
Required Security State
(MICR Secure Printers)
Print TROY E13-B MICR font
Print TROY CMC-7 MICR font
MICR mode enabled
MICR toner cartridge installed
MICR mode enabled
TROY MICR toner cartridge installed
Valid user login )
Keylock set to Print MICR
Print TROY Convenience Amount fonts None Valid user login )
Access TROY Auxiliary fonts (Data Capture, OCR,
AutoProtect ™ , Messaging, POSTNET, Security)
None or N/A Valid user login )
Access signatures, fonts, logos, forms, and macros stored
in the secure memory area of the printer
Valid administrator login Valid user or administrator login )
Access signatures, fonts, logos, forms and macros stored
in the public memory area of the printer
(No security requirements) (No security requirements)
Use the TROYmark ™ feature for the background image on
your checks
N/A (No security requirements) )
Encrypt MICR print data sent to your MICR printer N/A Encryption and decryption passwords
must be the same )
Add or delete a printer user name and password )
N/A Valid administrator login )
Print an audit report (Basic & Enhanced versions) Valid administrator login Valid user or administrator login )