Animal weighing using id codes, Animal weighing, Using id codes – Ohaus I150-S Indicator User Manual
Page 61
61
Animal Weighing
Animal Weighing
Animal Weighing
Animal Weighing
Animal Weighing
Before beginning this procedure, make
sure the number of sample readings to be
averaged has been entered for the “Ad”
parameter in the scale submenu.
1.
Press
FNCT
, then
3KEY
to access
the animal weighing mode.
“Ad” will be displayed indicating the
I150 is in the animal weighing mode.
2.
Place the subject on the load re-
ceiver.
3.
Press
ENTER
to begin averaging.
4.
The display will quickly count down
the number of readings being taken.
When the required number of read-
ings has been taken, the display will
show the average weight.
5.
The weight remains on the display
until you:
•
press
ENTR
to repeat the proce-
dure, or
•
press
CLR
to exit animal weighing.
When you exit animal weighing, the I150
returns to normal weighing operations
and displays the current load on the re-
ceiver.
Using ID Codes
Using ID Codes
Using ID Codes
Using ID Codes
Using ID Codes
The I150 allows you to store data using
ten ID codes, up to six digits in length. An
ID code may represent a particular prod-
uct, a package, or a part for example. The
codes are stored along with one of three
values; a tare weight, an average piece
weight, or an in-out weight
the “SCALE SUBMENU” section). The
following procedures explain how to use
ID codes.
FUNCTION
FUNCTION
FUNCTION
FUNCTION
FUNCTION
3
3
3
3
3
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
- / +
- / +
- / +
- / +
- / +
CLR
CLR
CLR
CLR
CLR