Ohaus I150-S Indicator - Manual (Page 43)

43
Non Printing Weight Values Non Printing Weight Values Non Printing Weight Values Non Printing Weight Values Non Printing Weight Values
and Auto Print Time Interval and Auto Print Time Interval and Auto Print Time Interval and Auto Print Time Interval and Auto Print Time Interval
This parameter allows you to exclude a
range of weights from being output by the
Auto print feature and/or specify a time
interval for automatic output. It does not
appear on the rs232 submenu if Auto print
is set to OFF.
To enter a range of values:
1. Press ENTER when “Init” is displayed.
2. The display will show “non PL”, the
parameter for the low end of the non-
printing range.
3. Press ENTR to view the current value.
4. To change the low-end value, use
the numeric keypad, then press EN-
TER .
5. Press DOWN to switch to “non PH”
on the display, the parameter for the
high end of the non-printing range.
6. Press ENTR to view the current value.
7. To change the high-end value, use
the numeric keypad, then press EN-
TER .
9. If “IntEr” was selected for the Auto
Print parameter, press DOWN to
scroll to “IntEr”. If it was not selected,
proceed to step 12.
10. Press ENTER .
Example
Example
ENTER ENTER ENTER ENTER ENTER
ENTER ENTER ENTER ENTER ENTER
ENTER ENTER ENTER ENTER ENTER
ENTER ENTER ENTER ENTER ENTER
ENTER ENTER ENTER ENTER ENTER
ENTER ENTER ENTER ENTER ENTER