Ohaus I150-S Indicator - Manual (Page 34)

34
8. To change the value, use the nu-
meric keypad.
For emptying processes, make the
displayed value negative by pressing
FUNC then CLRR .
9. To accept the displayed value, press
ENTER .
10. Press DOWN to display “End”.
11. Press ENTER to return to the scale
submenu.
Store Store Store Store Store
“StOrE” is used in conjunction with the ID
feature of the I150. It allows you to select
tare weight, average piece weight, or “in-
out” weight for storage with an ID code.
An in-out weight is the gross weight of a
truck, pallet, or other container.
To store tare weights, average piece
weights, or in-out weights with ID codes:
Press UPUP or DOWN to display the
desired selection, then press ENTER
to return to the scale submenu.
Refer to “Using ID Codes” in the OPERA-
TION section for instructions on saving
and retrieving data with ID codes.
LFT NOTE: LFT NOTE: LFT NOTE: LFT NOTE: LFT NOTE: Only tare and in-out are
available when LFT is set to ON.
ENTER ENTER ENTER ENTER ENTER
ENTER ENTER ENTER ENTER ENTER
ENTER ENTER ENTER ENTER ENTER
FUNCTION FUNCTION FUNCTION FUNCTION FUNCTION
- / + - / + - / + - / + - / +
CLR CLR CLR CLR CLR