Ohaus I150-S Indicator - Manual (Page 12)

12
Turning the I150 ON Turning the I150 ON Turning the I150 ON Turning the I150 ON Turning the I150 ON
After all connections have been made, plug in the power cord; the Power ON LED will
light. Press ZERO on the front panel. All display segments and indicators will light
briefly, and then clear.
Lights when scale is at center
of zero.
Indicates the I150 is in parts
counting mode.
Indicates that the currently dis-
played value is negative.
Indicates currently displayed
weight is net weight.
Lights when displayed weight
is stable (non LFT only).
Indicates currently displayed
weight is gross weight.
Lights when current weighing
unit is pounds.
Lights when current weighing
unit is ounces (non LFT only).
Indicates displayed value is a
percentage.
Lights when current weighing
unit is kilograms .
Indicates load receiver #1 is
displayed (non LFT only).
Indicates load receiver #2 is
displayed (non LFT only).
Lights when current weighing
unit is custom unit (non LFT
only).
Display Indicator Functions Display Indicator Functions Display Indicator Functions Display Indicator Functions Display Indicator Functions
Power ON LED
Display Window
Keypad
Numeric Keypad
Setpoint LEDs
Capacity Label
Window
Display Indicators
ON ON ON ON ON
ZERO ZERO ZERO ZERO ZERO