Ohaus I150-S Indicator User Manual
Page 17
17
To select an item from a menu:
To select an item from a menu:
To select an item from a menu:
To select an item from a menu:
To select an item from a menu:
Repeatedly press
UPUP
or
DOWN
until
the desired selection is displayed, then
press
ENTER
to select it.
Selections and Numeric Entries:
Selections and Numeric Entries:
Selections and Numeric Entries:
Selections and Numeric Entries:
Selections and Numeric Entries:
Some parameters offer you selections to
make while others require you to enter a
numeric value.
To make a selection:
To make a selection:
To make a selection:
To make a selection:
To make a selection:
Press
UPUP
or
DOWN
to display the
desired setting, then press
ENTER
.
To enter a numeric value:
To enter a numeric value:
To enter a numeric value:
To enter a numeric value:
To enter a numeric value:
Enter the number using the numeric key-
pad, then press
ENTER
. Errors can be
cleared by pressing
CLER
.
If an invalid number is entered, an accept-
able number will automatically be substi-
tuted.
If this occurs, press
ENTR
to accept the
new entry.
Dual Load Receivers:
Dual Load Receivers:
Dual Load Receivers:
Dual Load Receivers:
Dual Load Receivers:
If the I150 is configured for operation with
two load receivers, some parameters must
be entered separately. The load receiver
indicators in the display will show which
one is currently active. To change from
one load receiver to the other,
press
UPUP
or
DOWN
.
To exit from any menu:
To exit from any menu:
To exit from any menu:
To exit from any menu:
To exit from any menu:
Select “End” , then press
ENTER
to exit.
Load Receiver #2
Load Receiver #1
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
- / +
- / +
- / +
- / +
- / +
CLR
CLR
CLR
CLR
CLR
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER