EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual - Manual (Page 64)

IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
Issue 4.4.C
51
Note
In IPDP Spotbox modes, it is not possible to change the “protocol
receive page” as mentioned above. In this configuration, the system will
obey the previous LSM mode setting the user has defined.
4.7.3 C
LIP
N
AME
The Clip name can contain up to 24 alphanumeric characters.
Only 12 characters of this name can be displayed by LSM systems.
4.8 CLIP INFORMATION TAB
The Clip Information tab makes it possible to view and modify the information
related to the clip. It is active when a clip is loaded on the channel controlled by
the Control Panel. In case a train or a play-list is loaded, the fields on the Clip
Information tab are greyed-out.
You can enter the clip information in the Save Clip window when saving a new
clip. You can modify this information later on in the Clip Information tab.
The screenshot below shows the Clip Information tab: