EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual - Manual (Page 172)

IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
Issue 4.4.C
159
• On Time, at: the element will start at the defined time. The element will only be
started if the element is on-air at the specified time (independently of the date).
The element will start playing using the parameters defined in the play-list relating
to the element.
Note
If the Automatically option was selected when a start mode is defined
(Manually, on GPI, On Time, at), the still mode will default to the ‘stop
on Last frame of previous clip’ mode.
6.9.4 P
LAY
-L
IST
– P
REDEFINED
V
ALUES
S
ETTINGS
P
REDEFINED
E
FFECT
D
URATION
This allows the pre-selection of three default values that can be used when
defining a custom effect value for an element in a play-list.
These values are proposed in the combo box in the “define A/V duration” for the
transition, when on the Play-List Editor panel.
P
REDEFINED
A
UDIO
S
WAP
C
ONFIGURATION
This setting allows the user to set up common audio swap configurations in
advance to facilitate an efficient way of changing configurations when building
play-lists.
Common configurations can be made, named and added to a list using this set-up
area.
Once configurations have been defined they can be selected for use using the
Insert/Edit Tag command from the Play-List Editor contextual menu. For more
information on the use of Tags, see section ‘Insert Tag’, on page 133.