EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual - Manual (Page 166)

IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
Issue 4.4.C
153
Values with Insert and Append Delay
The train is inserted in the play-list as a play-list element with the following
values:
Field Inserted Values
Mark IN / OUT Values defined by the operator
• If a Mark OUT is not defined, it is considered to be unknown
(open end play-list element).
• If a Mark IN is not defined, the ‘Insert DELAY’ and ‘Append
DELAY’ buttons are greyed and un-selectable.
Name Name of the corresponding train recorder
Transition Default parameters defined for the transition in the play-list
settings
C
REATING A CLIP FROM THE PREVIEW CONTROL PANEL
When a train is loaded on the preview control panel, and if mark IN and/or mark
OUT are defined, the Save Clip button is available. A clip can be created in
exactly the same way as if using a standard control panel. The ‘Save Clip’ window
is opened based on the ‘Open save clip window …’ parameter in the settings.
If only a Mark IN or a Mark OUT is defined, the default clip duration defined in the
settings will define the clip duration.
6.8.7 L
OADING AND
M
ODIFYING A PLAY
-
LIST ELEMENT FROM THE
PLAY
-
LIST TAB
A play-list element can be dragged from the play-list list onto the preview control
panel to load it. The element cannot be a comment line, but could be a group in
which case, the first element of the group is loaded.
This operation allows for the modification of a clip’s properties within the play-list.
When the clip is modified the Update Clip button becomes active. The
modifications are not made into the play-list until the ‘Update Clip’ button is
clicked.