EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual - Manual (Page 15)

Issue 4.4.C IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
2
An active Recorder panel will show the location and name of the channel and a
timecode window with a display of running timecode that the channel is recording.
Above is the view of the Recorder Panel when viewing a LSM mode recorder. It
cannot be stopped by an IP Director workstation.
Above is the view of the Recorder Panel when viewing a Server or Spotbox mode
recorder. It can be started/stopped by an IP Director workstation
The timecode information displayed in green in the panel is the incoming timecode
of the server (should be the studio time). The capacity information displayed is
the remaining capacity on this specific recorder channel on the XT server.
1.2 RECORDER PANEL SHORTCUTS
In the IP Director main window, the menu Tools > Define Shortcut in the menu
bar allows the users to define shortcuts for most of the common operations with
the IP Director.
Shown in the screenshots below are all items that are available in the Recorder
panel with shortcuts, the default values are shown. These can be modified and
saved by the system user if desired.