EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual - Manual (Page 136)

IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
Issue 4.4.C
123
M
ODIFY
P
LAYBACK
P
ARAMETER
V
ALUES IN A
P
LAY
-L
IST
The playback parameters of an element or selection of elements can be modified
either by entering values directly in the list, by using the contextual menu, or by
selecting a choice from a pre-defined list box accessed in the parameter area.
When the mouse is clicked on a value that can be modified on a selected element,
the value becomes editable. If the area is a combo box, the combo box is opened
and the operator can select the setting required. If the area requires a value to be
entered, the value is selected in order for it to be modified.
If the ESC key is used on the keyboard, the editable area is exited and the
original cell value is restored.
If the ENTER key is pressed or a different area is clicked on, the modifications will
be validated.
V
ALUES
M
ODIFIED
B
Y
D
IRECT
E
NTRY
The values that can be modified by direct entry are:
Video Fx Dur Determines the length of the selected video transition, a
value in seconds and frames up to 1 minute can be used.
Audio Fx Dur Determines the length of the selected audio transition, a
value in seconds and frames up to 1 minute can be used.
Speed Determines the speed of playback for the selected
elements, a value as a percentage between 0 and 400%
can be entered.
Split Audio Determines a value for the time after a Video transition
that the audio transition will take place.
V
ALUES
M
ODIFIED
B
Y
S
ELECTION
Video Effect offers a selection choice of Cut, Mix, Wipe L-R and Wipe R-
L.
Audio Effect offers a selection choice of Cut or Mix.