Display warning messages, Display 3rd time information in the on-air panel – EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual User Manual
Page 168
IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
Issue 4.4.C
155
the Play-List Editor window by using a right-click on preview icon and selecting a
value, this will not change the default for all play-list tabs as changing the default
value here will.
D
ISPLAY
W
ARNING
M
ESSAGES
Enables or Disables the display of warning messages.
D
ISPLAY
3
RD TIME INFORMATION IN THE ON
-
AIR
P
ANEL
This enables or disables a 3
r d
time information area on the panel, and what it
contains.
If the parameter “Display time till the end of the current element” is selected in the
play-list settings, the following controls are displayed.
If the setting is selected to display the on-air T/C of the current element then the
display will change as below to show the on-air T/C:
If the parameter to display 3
r d
time information is unchecked in the play-list
settings, the following panels are displayed:
Remaining time till the end of
the current element.
Remaining time till the next element starts. The difference
between the 2 values is the effect duration
.
Remaining time till the next break in the play-
list. If the play-list has no break, the remaining
time till the end of the play-list is displayed.
Remaining time till the next element starts.