Replace by a linked clip, Eplace by a linked clip – EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual User Manual
Page 152
IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
Issue 4.4.C
139
5.
Do one of the following:
•
To insert the linked clip before the selected element in the list, select
the Insert Before option.
•
To insert the linked clip after the selected element in the list,
selection the Insert After option.
•
To abort the operation, select the Cancel option.
The linked clip is inserted at the requested position.
Note
If the selected clip has no linked clip, the menu has only displays “No
linked clip”.
R
EPLACE BY A LINKED CLIP
To replace a clip selected in a play-list by a linked clip, proceed as follows:
1.
Select the clip in the play-list that you want to replace by one of its linked
clips
2.
Right-click the Play-List Edit area.
3.
Select Replace by a linked clip from the contextual menu that is
displayed.
A sub menu is displayed including all clips linked to the selected clip.
4.
From the list, select the link clip that will replace the selected clip.
A popup window is displayed:
5.
Do one of the following:
•
To replace the selected clip by the linked clip in the play-list, select
the OK.
•
To abort the operation, select the Cancel option.