Conflict between mute and swap audio tracks, Linked clips, Insert a linked clip – EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual User Manual
Page 151
Issue 4.4.C
IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
138
Note
Hide, Mute and Audio Swap tags are automatically reset at the next
transition by the XT play-list engine.
Conflict between Mute and Swap Audio Tracks
Mute and Swap Audio Tracks tags cannot be defined at the same T/C value. If
Mute and Swap are conflicting, the following error window is displayed:
L
INKED
C
LIPS
A linked clip is a clip that was created at the same time as the clip already present
in the play-list but taken from a different record train. For example when recording
a show with a main transmission cut and several isolated camera angles, if clips
are created simultaneously on all angles, these would be given a linked clip status
by IP Director
Several actions on linked clips are possible from the Play-List Edit area:
•
‘Insert a Linked Clip’, on page 138
•
'Replace by a linked clip’, on page 139
•
'Preview a linked clip’, on page 140
I
NSERT A
L
INKED
C
LIP
To insert a linked clip from the Play-List Editor, proceed as follows:
1.
Select a clip in the play-list for which you want to insert linked clips.
2.
Right-click the Play-List Edit area.
3.
Select Insert a linked clip from the contextual menu that is displayed.
A sub menu is displayed including all clips linked to the selected clip.
4.
Selected the link clip to insert from the list.
A popup window is displayed: