Xerox CX PRINT SERVER 560 - Manual (Page 28)

Performing off-the-glass calibration from the Creo
Color Server
Requirements:
● Make sure that the Calibration is done off-the-glass option is
selected in the Preferences window.
Calibrate both the printer and scanner at the same time. If you
place only the print chart on the platen, the printer is calibrated. If
you place only the scanner chart on the platen, the scanner is
calibrated.
1. From the Tools menu, select Calibration.
2. Complete the preliminary steps required before you start the
off-the-glass calibration, and then click Next.
3. In the Tray list, select the desired tray. The default tray is Tray
1.
4. In the Screening list, select the screening method.
5. In the Number of copies box, enter the number of copies you
want to print.
Note: It is recommended that you print at least 25 copies of the
calibration chart, and then use one of the last copies printed.
6. (Optional) Select the Print calibration instructions check
box to print the calibration instructions.
18 Chapter 3—Calibration