Xerox CX PRINT SERVER 560 - Manual (Page 112)

Parameter Option Description
Gradation Contains a list of gradation tables that were created in the
CX print server Gradation Tool window. Each gradation
table contains specific settings for brightness, contrast, and
color balance.
Provides the following options:
● None—Applies maximum dry ink coverage. This is the
default setting.
● Cool—Makes blue tones appear clearer.
● Lively—Increases the color saturation.
● Saturated—Increases the strength (chroma or purity).
● Sharp—Increases the contrast.
● Warm—Sets the hues in the low densities to a bright
reddish color.
When you select your predefined gradation table, your job
is adjusted according to the specific table's settings.
GCR Conserves toner by replacing the gray component (CMY) of
pixels with black toner.
Selecting Normal gives you a smoother image quality.
Selecting High, gives you a less smooth image quality
(adds black into flesh tones).
The gray component replacement also prevents the
consequences of excessive toner buildup, such as flaking
and cracking , or the "curling" effect that may occur when
printing transparencies.
While the gray component of each color is replaced by
black, there is no change in the color quality of the printed
image.
Print grays using
black dry toner Prints RGB gray text, images, and graphics with black toner
only. This option makes the blacks richer and darker.
You can select from the following:
● For text
● For text and graphics
● For text, graphics, and images
In addition, you can Apply only when R, G, B values are
the same.
Color Flow Use Embedded
ICC profile Provides source profiles from different sources, such as
digital cameras, the Internet, and scanners common RGB
color spaces.
Note: If you select the Use Embedded ICC profile option
and the file does not contain an embedded source profile,
the CX print server uses the default source profiles.
CMYK source
profile Enables you to select a CMYK source profile.
102 Chapter 11—Job parameters