Xerox CX PRINT SERVER 560 - Manual (Page 114)

Parameter Option Description
Emulate source
paper tint Emulates the original paper tint if the tint is included in the
profile.
Notes:
● If you select Emulate source paper tint, you cannot
select Preserve pure CMY colors.
● If the job is simplex, only the front side will be printed
using the tint emulation.
● If you select Emulate source paper tint, Absolute is
used as the rendering intent.
RGB source
profile Enables you to select an RGB source profile.
RGB rendering
intent Provides the following options (for information on each
option, see the descriptions of the CMYK rendering intent
options in this table):
● Auto
● Relative
● Absolute
● Saturation
● Perceptual
Apply CMYK
emulation To convert RGB elements according to the selected CMYK
emulation method, select the Apply CMYK emulation. The
RGB elements receive the same look as the CMYK
elements, creating a unified appearance.
Destination Profile Provides the following options:
● Linked—Uses the destination profile that was linked
using the Media and Color Manager in the Resource
Center.
● Xerox560
Spot color Spot color Provides the following options:
● Spot Dictionary—Applies the CMYK values that are
defined in the spot color dictionaries. You can edit these
values using the Spot Color Editor tool. The spot color
dictionaries supported are: HKS, DIC Color Guide,
Pantone, Pantone GOE, Pantone Plus, and TOYO.
Refer to the Spot Color Editor window for the complete
list.
● Original file values—Uses the CMYK values from your
file.
● Destination Profile—Uses the destination profile that is
selected under Color > Color Flow, and applies it to the
spot CMYK values.
104 Chapter 11—Job parameters