Zoom MRS-802 - Manual (Page 96)

Reference [Rhythm]
ZOOM MRS-802
96
Erasing a rhythm pattern
This section explains how to erase all data from a specified
rhythm pattern, returning it to a blank state.
1.
In rhythm pattern mode ([SONG/PATTERN] key
out), press the [DRUM] key so that it is lit.
2.
Turn the dial to select the rhythm pattern to erase.
If the [SONG/PATTERN] key is lit, press it so that it goes
out.
3.
Press the [DELETE/ERASE] key.
The indication “DELETE SURE?” appears on the display.
4.
Press the [ENTER] key to erase the rhythm pattern,
or press the [EXIT] key to cancel.
When you press the [ENTER] key, the contents of the
pattern will be erased, and the display returns to the rhythm
pattern selection screen, with the now empty rhythm pattern
as the selected pattern.
5.
To return to the main screen, press the [EXIT] key
several times.
Importing rhythm patterns and
rhythm songs from another
project
This section explains how to import rhythm pattern data and
rhythm song data from another project that was saved on the
hard disk.
1.
From the main screen, press the [DRUM] key so
that the key lights up.
2.
Press the [UTILITY] key in the display section.
The rhythm utility menu for various rhythm section settings
appears.
3.
Use the cursor left/right keys to bring up the
indication “UTILITY Import” an the display, and
press the [ENTER] key.
The display shows the following screen.
4.
Turn the dial to select the project from which to
import data, and press the [ENTER] key.
The indication “Import SURE?” appears on the display.
5.
Press the [ENTER] key.
The data are imported into the current project. When the
process is completed, the screen of step 2 appears again.
6.
To return to the main screen, press the [EXIT] key
several times.
--#000 --#000
EMPTY
EMPTY 1
Import Import
PRJ012
PRJ012 12