Zoom MRS-802 - Manual (Page 32)

Quick Tour
ZOOM MRS-802
32
2.
Press the PLAY [ R ] key to play the song, and
check the level after the [MASTER] fader.
This can be done by observing the level meter in the lower
right of the display. If the 0 dB indicator lights up during
play, turn down the [MASTER] fader to perform fine
adjustment. After checking the level, press the STOP [ P ]
key.
3.
Repeatedly press the [MASTER] status key so that
the key lights up in red.
The master track can now be recorded.
4.
Hold down the REC [ O ] key and press the PLAY
[ R ] key.
Recording on the master track starts.
5.
When recording is completed, press the STOP [ P ]
key.
6.
To play the master track, repeatedly press the
[MASTER] status key until it is lit in green.
In this condition, the master track can be played. All other
status keys automatically go out and the signals from other
tracks are automatically muted.
7.
Press the ZERO [ U ] key to return to the beginning
of the song, and press the PLAY [ R ] key.
The master track is played back. To stop playback, press the
STOP [ P ] key.
8.
To return the MRS-802 to normal operation,
repeatedly press the [MASTER] status key until it is
out.
Muting of other tracks is canceled, and the status keys revert
to the original condition.
H INT
• With the CD-R/RW drive, you can record the contents of
the master track onto CD-R/RW media to create an audio
CD. For details, refer to page 111.
• The contents of the master track can also be edited later.
Right channel
signal level Left channel
signal level