Zoom MRS-802 - Manual (Page 108)

Reference [Effects]
ZOOM MRS-802
108
2.
Use the PATCH SELECT [ Q ]/[ W ] keys or the dial to
select the new patch.
As you turn the dial, new patches will be recalled
immediately. If the track mixer REVERB SEND and
CHORUS/DELAY SEND parameter settings are raised, you
can press the PLAY [ R ] key to play back the song, and
listen to the result of the newly selected patch.
H INT
• For details on track mixer operations, refer to p. 71.
• The lit/out status of the [REVERB] or [CHORUS/DELAY]
key shows the on/off status of that module. Each push of
the key toggles the status.
3.
To return to the main screen, press the [EXIT] key.
Editing a send/return effect patch
This section explains how to edit a send/return effect patch.
1.
Press the [REVERB] key or [CHORUS/DELAY] key
in the effect section.
2.
If necessary, turn the dial to select the patch that
you want to edit. The following screen is an
example of the display indication when the
[CHORUS/DELAY] key was pressed.
3.
Press the [EDIT] key.
The display will indicate “EDIT”, and a screen will appear
in which you can edit the patch. When the [EDIT] key is
pressed, the effect type selected for that send/return effect is
shown.
4.
If you want to change the effect type, turn the dial.
When the effect type is changed, the effect parameters will
also change accordingly.
H INT
If the contents of a patch have been edited, the “EDIT”
indicator in the upper part of the display will change to
“EDITED”.
5.
Use the cursor up/down keys to select the effect
parameter that you want to edit.
The first line of the display shows the effect type, and the
second line the effect parameter name.
The current setting is shown to the right of the parameter
name.
6.
Turn the dial to change the setting.
For details on the effect types that can be selected for reverb
or chorus/delay, and on the range of each effect parameter,
refer to the appendix (
→ p. 145 – 153) at the end of this
manual.
7.
Repeat steps 5 - 6 as necessary to edit other effect
parameters.
8.
When you have finished editing, press the [EXIT]
key.
The unit returns to the patch select screen.
N OTE
Keep in mind that if you select another patch without first
storing the patch, the edited contents will be lost. If you want
to keep the results of your editing session, refer to the
following section.
SEND CHO SEND CHO
DeepCho
DeepCho 7
Effect type
TYPE TYPE
CHORUS
CHORUS
TYPE TYPE
DELAY
DELAY
Setting value Effect parameter
DELAY DELAY
TIME
TIME 370