Zoom MRS-802 - Manual (Page 135)

Reference [Other Functions]
ZOOM MRS-802
135
Changing the function of the
foot switch
With the default settings of the MRS-802, a foot switch
connected to the CONTROL IN jack can be used to control
play/stop of the recorder. If you want to use the foot switch
to control manual punch-in/out recording (
→ p. 35), use the
following procedure to change the internal setting.
1.
From the main screen, press the [UTILITY] key in
the display section.
The utility menu appears.
2.
Use the cursor left/right keys to bring up the
indication “UTILITY SYSTEM” on the display, and
press the [ENTER] key.
The system utility menu for making various system settings
appears.
3.
Verify that the indication “SYSTEM FOOT SW” is on
the display, and press the [ENTER] key.
The function currently assigned to the foot switch will be
displayed.
4.
Turn the dial to select “PLY_STP” or “PUNCH IO”.
The settings are as follows.
• PLY_STP
Each push of the foot switch toggles between play and stop
of the recorder section (default setting).
• PUNCH IO
The foot switch can be used to perform manual punch-in/
out. (Pressing the foot switch has the same effect as pressing
the REC [ O ] key.)
5.
To return to the main screen, press the [EXIT] key
several times.
UTILITY UTILITY
TR EDIT
TR EDIT
SYSTEM SYSTEM
FOOT SW
FOOT SW
FOOT SW FOOT SW
PLY_STP
PLY_STP
Reference [Other Functions]
This section explains various other functions of the MRS-802.