Zoom MRS-802 - Manual (Page 45)

Reference [Recorder]
ZOOM MRS-802
45
forward or backward in milliseconds or ticks.
5.
If you want to use the preview function to hear the
region before the current location, press the REW
[ T ] key. To hear the region after the current
location, press the FF [ Y ] key.
If you press the REW [ T ] key, a region of 0.7 seconds prior
to the current location will play (ending at the current
location). If you press the FF [ Y ] key, a region of 0.7
seconds following the current location will play (beginning
at the current location). This is called “preview playback”.
When preview playback ends, scrub playback will resume.
6.
To cancel the scrub function, press the STOP [ P ]
key.
The unit returns to the main screen.
Changing the settings of the scrub
function
When the scrub function is on, you can change the direction
of the scrub playback (whether it will play the region before
or after the current location), and the length of the scrub
playback region.
1.
From the main screen, hold down the STOP [ P ]
key and press the PLAY [ R ] key.
This turns the scrub function on, and the following screen
will appear. The characters in the lower left (TO/FRM)
indicate the direction of scrub playback, and the number in
the lower right (40 - 200) is the length of scrub playback.
2.
If you want to change the length of scrub playback,
use the cursor left/right keys to cause the scrub
playback length setting to flash, and turn the dial.
You can select 40, 80, 120, 160, or 200 (ms) as the length of
scrub playback.
H INT
You can also use the cursor up/down keys to change the
scrub playback length.
3.
If you want to change the direction of scrub
playback, use the cursor left/right keys to cause
the scrub playback direction indication to flash,
and turn the dial.
If you select “TO”, scrub playback will begin from an earlier
point and end at the current location. If you select “FRM”,
scrub playback will begin from the current location (this is
the default setting).
H INT
Any change you make to the scrub settings will take effect
immediately.
4.
If you want to use the new scrub playback settings
to find a location, use the cursor left/right keys to
move the flashing area to the unit displayed at the
right of the counter (“MS” for time display, or
“TICK” for measure display).
5.
Turn the dial to the left or right to move the current
location.
During scrub playback, the current location can be moved
forward or backward in milliseconds or ticks.
6.
To exit the scrub function, press the STOP [ P ] key.
The unit returns to the main screen.
SCRUB SCRUB
FRM 40ms
FRM 40ms
04
TO TO FRM FRM
Current location Current location
(Default setting)
Scrub playback Scrub playback