beautypg.com

Listening to the demo songs, Prj sel prj sel slave slave, Demo song protect status – Zoom MRS-802 User Manual

Page 19: Turning on the power, Selecting the demo song

background image

Listening to the Demo Songs

ZOOM MRS-802

19

Demo song protect status

The demo songs on the hard disk are set to protected status,

which means that level mixing and other settings can be

changed while you play the song, but the changes cannot be

stored on the disk. If you wish to retain changes you have

made, disable the protect status (

→ p. 127).

Turning on the power

1.

Make sure that the AC adapter, instrument, and

audio system (or headphones) are correctly

connected to the MRS-802. (For information on

connections, refer to page 15.)

2.

Press the [POWER] switch on the rear panel.

Power to the MRS-802 comes on, the unit performs a self-

test, and switch settings are read. Wait until the following

indication appears on the display. This screen is called the

main screen.

3.

Turn on the audio system connected to the

MASTER OUTPUT jacks.

H

INT

When a synthesizer or other electronic instrument is

connected to the MRS-802, turn power on in the order

synthesizer

MRS-802

audio system. Turn power off in

the reverse order.

Selecting the demo song

On the MRS-802, song data are managed in units called

"projects". A project encompasses recorded audio data,

rhythm patterns and rhythm songs of the rhythm section,

internal effect patches (effect programs), and other

information. When you load a project, the complete state in

which that song was saved will be reproduced.

To load the demo song project from the hard disk, proceed

as follows.

1.

Press the [PROJECT] key.

The indication "PROJECT SELECT" appears on the

display. This is the screen for selecting a project.

2.

Press the [ENTER] key.

Projects stored on the hard disk are shown in the lower part

of the display.

3.

Turn the dial to select the demo song.

Projects number 0 and 1 are demo songs.

4.

Press the [ENTER] key.

The selected project is loaded. While the hard disk is being

accessed, the [HDD] indicator lights up and the indication

"LOADING" appears on the display. When the display

changes, the demo song has been loaded.

PRJ 000

PRJ 000
SLAVE

SLAVE

0 0 0 0 001 1 0

PRJ SEL

PRJ SEL
SLAVE

SLAVE

0

Project name Project number

Listening to the Demo Songs

When shipped from the factory, the internal hard disk of the MRS-802 contains two demo songs. To listen to these, proceed as

follows.