Zoom MRS-802 - Manual (Page 129)

Reference [MIDI]
ZOOM MRS-802
129
Making MIDI-related settings
This section explains how to make MIDI-related settings.
The procedure is the same for most settings. The basic steps
are as follows.
Basic procedure
1.
Press the [DRUM] key in the rhythm section, and
then press the [UTILITY] key.
The rhythm utility menu for making various rhythm section
settings appears.
2.
Use the cursor left/right keys to bring up the
indication “UTILITY MIDI” on the display.
3.
Press the [ENTER] key.
Now you can select MIDI-related setting items.
4.
Use the cursor left/right keys to select one of the
following items, and press the [ENTER] key.
• DRUM CH
Set the MIDI channel of the drum track.
• SPP
Turn Song Position Pointer transmission on/off.
• COMMAND
Turn Start/Stop/Continue message transmission on/off.
• CLOCK
Turn Timing Clock transmission on/off.
H INT
There is no parameter for turning Control Change on or off.
When the drum kit is set to send and receive MIDI messages,
Control Change send/receive is also enabled.
5.
Press the [ENTER] key to display the setting of the
selected item, and turn the dial to change the
setting.
For details on each item, refer to the following explanation.
N OTE
Operation steps related to SMF are explained on page 131.
6.
When you have finished making settings, press the
[EXIT] key several times.
The unit returns to the main screen.
Utility Utility
MIDI
MIDI
MIDI MIDI
DRUM CH
DRUM CH