Zoom MRS-802 - Manual (Page 152)

Appendix
ZOOM MRS-802
152
■ MASTERING algorithm
● 3 BAND COMP/Lo-Fi module
Parameter Description
● NORMALIZER module
Parameter Description
● 3 BAND EQ module
For an explanation of types and parameters, see the CLEAN, DIST, ACO/BASS SIM, BASS algorithm.
● ZNR module
For an explanation of types and parameters, see the CLEAN, DIST, ACO/BASS SIM, BASS algorithm.
● VOL PDL module
For an explanation of types and parameters, see the CLEAN, DIST, ACO/BASS SIM, BASS algorithm.
Type Parameter
MLT CMP
XOVER_Lo XOVER_Hi SNS_HIGH SENS_MID SENS_LOW MIX_HIGH MIX_MID MIX_LOW
An effect that divides the input signal into three frequency bands and lets you specify a compressor and mix amount for each band.
Lo-Fi
CHARA COLOR DIST TONE EFX LVL DRY LVL
An effect that intentionally degrades the audio quality of the sound.
Parameter Name Setting Range Parameter Description
XOVER_Lo 50 – 16000 Adjusts the frequency for bass/midrange division.
XOVER_Hi 50 – 16000 Adjusts the frequency for midrange/treble division.
SNS_HIGH 0 – 15 Adjusts the compressor input sensitivity for the treble range.
SENS_MID 0 – 15 Adjusts the compressor input sensitivity for the midrange.
SENS_LOW 0 – 15 Adjusts the compressor input sensitivity for the bass range.
MIX_HIGH OFF, -24 – 6 Adjusts the treble mix amount.
MIX_MID OFF, -24 – 6 Adjusts the midrange mix amount.
MIX_LOW OFF, -24 – 6 Adjusts the bass mix amount.
CHARA 0 – 10 Specifies the character of the filter.
COLOR 1 – 10 Specifies the color.
DIST 0 – 10 Adjusts the degree of distortion.
TONE 0 – 10 Adjusts the tone.
EFX LVL 0 – 30 Adjusts the mix amount of the effect sound.
DRY LVL 0 – 30 Adjusts the mix amount of the direct sound.
Type Parameter
NORMMLZR
GAIN
Lets you set the output level of the 3 BAND COMP/Lo-Fi module.
Parameter Name Setting Range Parameter Description
GAIN -12 – 12 Adjusts the level.