Zoom MRS-802 - Manual (Page 126)

Reference [Projects]
ZOOM MRS-802
126
• REMAIN (h/m units)
The approximate recordable time remaining for each track is
shown in hours (h)/minutes (m)/seconds.
• PRJ SIZ (MB units)
This shows the size of the currently loaded project in MB
(megabyte) units.
• PRJ SIZ (h/m units)
This shows the size of the currently loaded project in terms
of the recorded time per track, in hours (h)/minutes (m)/
seconds.
H INT
• These screens are for display only, and contain no items
that can be edited.
• The remaining recordable time is an approximation.
Duplicating a project
This operation copies a specified project that is saved on the
hard disk.
1.
Refer to steps 1 - 2 of “Basic procedure” to bring
up the indication “PROJECT COPY” on the display.
Then press the [ENTER] key.
The name and number of the project to copy are shown on
the display.
2.
Turn the dial to select the copy source project, and
press the [ENTER] key.
The screen for selecting the copy destination project appears
on the display.
3.
Turn the dial to select the copy destination project
number, and press the [ENTER] key.
The indication “SURE?” appears on the display.
4.
Press the [ENTER] key to copy the project, or press
the [EXIT] key to cancel.
When copying is completed, the unit returns to the main
screen.
Erasing a project
This operation erases the specified project from the hard
disk.
1.
Refer to steps 1 - 2 of “Basic procedure” to bring
up the indication “PROJECT ERASE” on the
display. Then press the [ENTER] key.
The project to erase is shown on the display.
2.
Turn the dial to select the project to be erased.
3.
Press the [ENTER] key to erase the project, or
press the [EXIT] key to cancel.
To return to main screan after erasing is completed, press the
[EXIT]key.
N OTE
• Once a project has been erased, it cannot be recovered.
Use this operation with care.
• This item cannot be selected for projects with the protect
ON setting.
REMAIN REMAIN
45h55m46
45h55m46
PRJ SIZE PRJ SIZE
00122MB
00122MB
PRJ SIZE PRJ SIZE
00h24m13
00h24m13
PRJ COPY PRJ COPY
PRJ012
PRJ012 12
Project name Project number
PRJ COPY PRJ COPY
COPY TO
COPY TO 14
Copy destination project number
PRJ ERS PRJ ERS
PRJ011
PRJ011 11
Project name Project number