Zoom MRS-802 - Manual (Page 30)

Quick Tour
ZOOM MRS-802
30
■ Selecting the send/return effect patch
1.
From the main screen, press the [REVERB] key or
[CHORUS/DELAY] key in the effect section.
Press the [REVERB] key to select a reverb patch, or the
[CHORUS/DELAY] key to select a chorus/delay patch. The
display will indicate the patch that is currently selected for
the effect you selected. For example, a screen such as shown
below appears when the [REVERB] key is pressed.
2.
Turn the dial to select a patch.
The send/return effect has 20 preprogrammed patches
(numbered 0 - 19). If desired, you can edit these patches to
modify the effect further (
→ p.108).
3.
Select the patch for the other send/return effect in
the same way.
4.
To return to the main screen, press the [EXIT] key
several times.
N OTE
In the default condition, the send level for the send/return
effect is set to 0 for each track. Therefore you need to raise
the setting to verify the sound produced by the effect.
■ Adjusting the send/return effect intensity
for each track
5.
From the main screen, press the [TRACK
PARAMETER] key and use the status keys to select
the track for which you want to make the setting.
6.
Use the cursor up/down keys to bring up the
indication CHO SEND or REV SEND onto the
second line of the display.
Select CHO SEND if you want to adjust the chorus/delay
send level. Select REV SEND if you want to adjust the
reverb send level.
7.
While playing the song, turn the dial to adjust the
send level value.
8.
Adjust the send level for other tracks in the same
way.
9.
Adjust the intensity of the other send/return effect
in the same way.
10.
To return to the main screen, press the [EXIT] key
several times.
Patch name Patch number
SEND REV SEND REV
VcxRev
VcxRev 8
SEND REV SEND REV
SoftHall
SoftHall 2
TR2 TR2
REV SEND
REV SEND 0
TR2 TR2
REV SEND
REV SEND 48