Basic features, Basic features –2 – Xantrex Technology SW Plus 4024 User Manual
Page 28

Introduction
1–2
976-0043-01-02
Basic Features
Congratulations on your purchase of a
Sine Wave Plus Inverter/Charger
from
Xantrex Technology, Inc.
The
Sine Wave Plus
is one of the finest
inverter/chargers on the market today, incorporating state-of-the-art
technology, high reliability, and convenient control features.
Specific features include:
•
FCC Part B compliant
•
2.5 kW, 4.0 kW, or 5.5 kW continuous output of sine wave power for
120 Vac/60 Hz applications (depending on model)
•
expandable up to 11 kW for 120/240 Vac/60 Hz applications by
combining dual inverters using the Inverter Stacking Control – Series
(ISC-S) cable
•
24-volt or 48-volt models
•
multi-stage battery charging
•
battery temperature sensor which provides automatic temperature
compensation for battery charging
•
push-button control module with a liquid crystal display (LCD) for
easy programming and troubleshooting
•
light emitting diode (LED) display of system operational status
•
automatic on/off control of electric-start generators
(requires additional equipment)
•
remote monitoring (requires additional equipment)
•
auxiliary load control (requires additional equipment)
•
high surge/current capacity (depending on the unit, it will surge up to
5.9 times the continuous current rating for a minimum of 2 seconds).
See
Appendix A, “Electrical Specifications”
•
energy management features control utility and/or generator usage
•
energy efficient to 95% peak and less than 20 watts of idle current;
less than 2 watts in Search Mode
The default settings of the
Sine Wave Plus Inverter/Charger
allow the
system to perform in many installations without the need for additional
setup. However, if additional setup parameters are required, the push-
button features on the Inverter Control Module (ICM) display on the front
panel of the unit enables the system to be easily reprogrammed to meet
specific customer configurations.