Xantrex Technology SW Plus 4024 User Manual
Page 186
Advanced Setup
7–8
976-0043-01-02
23 ALM Relays Menu
See
“23 ALM Relays Menu” on page 7–19
for details.
23A RY9 VDC Energized
44.2 to 71.0
52.0
23B RY9 VDC DeEnergized
40.0 to 71.0
44.0
23C RY9 Delay at DeEngz. Min
00 to 255
10
23D RY10 VDC Energized
20.0 to 64.0
57.6 Vdc
23E RY10 VDC DeEnergized
20.0 to 64.0
53.6 Vdc
23F RY10 Delay at DeEngz. Min
00 to 255
10
23G RY11 Mode
Cooldown Error
Error
End Menu 23
24 Generator Timers Menu
See
“24 Generator Timers Menu” on page 7–26
for details.
24A Gen Run Time Start h:m
00:00 to 23:50
08:00
24B Gen Run Time Stop h:m
00:00 to 23:50
08:00
24C Quiet Time Begin h:m
00:00 to 23:50
08:00
24D Quiet Time End h:m
00:00 to 23:50
08:00
24E Gen Exercise Period Days
00 to 255
30
24F Gen Exercise Timer Min
00 to 255
15
24G Gen Cooldown Timer Min
00 to 255
02
24H RN2/Max Gen Run h:m
00:00 to 23:50
08:00
End Menu 24
25 Gen Starting Details Menu
See
“25 Gen Starting Details Menu” on page 7–29
for details.
25A RY7 Mode
GS RN1 RN2
GS
25B Gen Warm-up
Second/Minute
0 to 127
/0 to 127
10
Seconds
25C Pre Crank Seconds
00 to 255
10
25D Max Cranking Seconds
01 to 15
10
25E Post Crank Seconds
00 to 255
30
End Menu 25
26 Gen Auto Run Setup Menu
See
“26 Gen Auto Run Setup Menu” on page 7–38
for details.
Table 7-3 Advanced Setup Default Settings for the
Sine Wave Plus
Plus 5548 Models
Advanced Setup Menus
Sine Wave Plus
5548
See Page
Range/Display
Default
Settings