Set point buttons, Figure 5-6 icm set point push-buttons, Reset factory defaults – Xantrex Technology SW Plus 4024 User Manual
Page 138: Figure 5-7 icm reset defaults button, Set point buttons –6 reset factory defaults –6, Figure 5-6, Icm set point push-buttons –6, Figure 5-7, Icm reset defaults button –6, Caution: equipment damage
Navigation
5–6
976-0043-01-02
Set Point Buttons
The SET POINT buttons change the value of a parameter or select a mode
from the displayed menu.
•
Press the SET POINT button (+) to move the cursor to the right or
raise an adjustable value.
•
Press the SET POINT button (–) to move the cursor left or lower an
adjustable value.
Reset Factory Defaults
The Reset Defaults push-button at the bottom of the ICM refreshes the
LCD display.
Pressing this button when the “Press Resets for Factory Default” menu is
displayed resets the unit to the factory defaults. See
Factory Defaults” on page 8–21
for instructions on using this feature.
Figure 5-6 ICM Set Point Push-buttons
Figure 5-7 ICM Reset Defaults button
CAUTION: Equipment Damage
Ensure all devices connected to the ALM or GSM are disabled prior to pressing
the Reset Factory Defaults button.