Xantrex Technology SW Plus 4024 - Manual (Page 229)

The User Menu Summary
976-0043-01-02 8–11
The User Menu Summary
The User Menu provides all the controls and settings that may be required
on a daily basis such as turning ON the inverter and/or generator, reading
the AC and DC meters, checking the possible causes of an error, or
adjusting the inverter’s real-time clock.
Most menu headings in the User Menu do not set configuration
parameters (Read Only) but do provide system performance information.
Those menu items which are not specified as “Read Only” may be
configured through the user menu.
Table 8-2 User Menu
User Menus
Sine Wave Plus
2524 and 4024
Sine Wave Plus
2548,4048, and 5548
See Page
Range/
Display Default
Settings Range/
Display Default
Settings
01 Inverter ON/OFF Menu See “01 Inverter ON/OFF Menu” on page 8–15 for details.
01A Inverter OFF SRCH
ON CHR OFF OFF SRCH
ON CHR OFF page 8–15
01B EQ Charge OFF ON OFF OFF ON OFF page 8–16
01C Search Watts (SRCH) 00 to 248 08 00 to 248 08 page 8–16
01D Bypass Mode AC1 NORM
AC2 NORM AC1 NORM
AC2 NORM page 8–17
End Menu 01
02 Generator ON/OFF Menu See “02 Generator ON/OFF Menu” on page 8–17 for details.
02A Generator OFF AUTO
ON OFF OFF AUTO
ON OFF page 8–18
02B Gen Start Load Amps YES NO Read Only YES NO Read Only page 8–19
02C Gen Start Volts/Manual YES NO Read Only YES NO Read Only page 8–19
02D Gen Start Exercise Run YES NO Read Only YES NO Read Only page 8–19
02E Gen Start Run Time YES NO Read Only YES NO Read Only page 8–19
02F Days left to Gen Exercise 00 to 255 Read Only 00 to 255 Read Only page 8–19
End Menu 02
03 Time of Day (00:00:00) See “03 Time Of Day Menu” on page 8–20 for details.
SW Plus
Version 2.01 Info.
Displayed Read Only Info.
Displayed Read Only page 8–20
X.X KVA ** 120 Vac 60 Hz
(where X.X = 2.5, 4.0 or 5.5) **24 Vdc Read Only **48 Vdc Read Only page 8–20