ZyXEL Communications ZyXEL Dimension ES-2024PWR - Manual (Page 67)

Ethernet Switch CLI Reference Guide
67
C
H A P T E R
12
Date and Time Commands
Use these commands to configure the date and time on the Switch.
12.1 Command Summary
The following table describes user-input values available in multiple commands for this
feature.
The following section lists the commands for this feature.
Table 36 time User-input Values
COMMAND DESCRIPTION
week Possible values (daylight-saving-time commands only): first, second,
third, fourth, last.
day Possible values (daylight-saving-time commands only): Sunday,
Monday, Tuesday, ....
month Possible values (daylight-saving-time commands only): January,
February, March, ....
o’clock Possible values (daylight-saving-time commands only): 0-23
Table 37 time Command Summary
COMMAND DESCRIPTION M P
show time Displays current system time and date. E 3
time <hour:min:sec> Sets the current time on the Switch.
hour: 0-23
min: 0-59
sec: 0-59
Note: If you configure Daylight Saving Time
after you configure the time, the Switch
will apply Daylight Saving Time.
C 13
time date <month/day/year> Sets the current date on the Switch.
month: 1-12
day: 1-31
year: 1970-2037 C 13
time timezone <-1200|...|1200> Selects the time difference between UTC (formerly
known as GMT) and your time zone.
C 13
time daylight-saving-time Enables daylight saving time. The current time is
updated if daylight saving time has started.
C 13