ZyXEL Communications ZyXEL Dimension ES-2024PWR - Manual (Page 215)

Ethernet Switch CLI Reference Guide
215
C
H A P T E R
61
Syslog Commands
Use these commands to configure the device’s system logging settings and to configure the
external syslog servers.
61.1 Command Summary
The following table describes user-input values available in multiple commands for this
feature.
The following section lists the commands for this feature.
Table 126 syslog User-input Values
COMMAND DESCRIPTION
type Possible values: system , interface , switch , aaa , ip .
Table 127 syslog Command Summary
COMMAND DESCRIPTION M P
syslog Enables syslog logging. C 13
no syslog Disables syslog logging. C 13
Table 128 syslog server Command Summary
COMMAND DESCRIPTION M P
syslog server <ip-address> level
<level> Sets the IP address of the syslog server and the severity
level.
level: 0-7
C 13
no syslog server <ip-address> Deletes the specified syslog server. C 13
syslog server <ip-address>
inactive Disables syslog logging to the specified syslog server. C 13
no syslog server <ip-address>
inactive Enables syslog logging to the specified syslog server. C 13
Table 129 syslog type Command Summary
COMMAND DESCRIPTION M P
syslog type <type> Enables syslog logging for the specified log type. C 13
syslog type <type> facility <0-
7> Sets the file location for the specified log type. C 13
no syslog type <type> Disables syslog logging for the specified log type. C 13