ZyXEL Communications ZyXEL Dimension ES-2024PWR - Manual (Page 181)

Ethernet Switch CLI Reference Guide
181
C
H A P T E R
48
Port-based VLAN Commands
Use these commands to configure port-based VLAN.
"
These commands have no effect unless port-based VLAN is enabled.
48.1 Command Summary
The following section lists the commands for this feature.
48.2 Command Examples
This example looks at the ports to which incoming traffic from ports 1 and 2 can be forwarded.
Table 103 egress Command Summary
COMMAND DESCRIPTION M P
show interfaces config <port-
list> egress Displays outgoing port information. E 3
vlan-type <802.1q|port-based> Specifies the VLAN type. C 13
interface port-channel <port-
list> Enters config-interface mode for the specified port(s). C 13
egress set <port-list> Sets the outgoing traffic port list for a port-based VLAN. C 13
no egress set <port-list> Removes the specified ports from the outgoing traffic port list. C 13
sysname# show interfaces config 1-2 egress
Port 1: Enabled egress ports cpu, eg1
Port 2: Enabled egress ports cpu, eg1-eg4