ZyXEL Communications ZyXEL Dimension ES-2024PWR - Manual (Page 143)

Ethernet Switch CLI Reference Guide
143
C
H A P T E R
36
MAC Filter Commands
Use these commands to filter traffic going through the Switch based on the MAC addresses
and VLAN group (ID).
"
Use the running configuration commands to look at the current MAC filter
settings. See
Chapter 54 on page 195 .
"
MAC filtering implementation differs across Switch models.
• Some models allow you to specify a filter rule and discard all packets with the specified
MAC address (source or destination) and VID.
• Other models allow you to choose whether you want to discard traffic originating from the
specified MAC address and VID (src), sent to the specified MAC address (dst) or both.
See Section 36.2 on page 144 and Section 36.3 on page 144 for examples.
36.1 Command Summary
The following section lists the commands for this feature.
Table 84 mac-filter Command Summary
COMMAND DESCRIPTION M P
mac-filter name <name> mac <mac-
addr> vlan <vlan-id> Configures a static MAC address port filtering rule.
name: 1-32 alphanumeric characters C 13
no mac-filter mac <mac-addr>
vlan <vlan-id> Deletes the specified MAC filter rule. C 13
mac-filter name <name> mac <mac-
addr> vlan <vlan-id> inactive Disables a static MAC address port filtering rule.
name: 1-32 alphanumeric characters C 13
no mac-filter mac <mac-addr>
vlan <vlan-id> inactive Enables the specified MAC-filter rule. C 13
mac-filter name <name> mac <mac-
addr> vlan <vlan-id> drop
Specifies the source and or destination filter parameters. C 13