ZyXEL Communications ZyXEL Dimension ES-2024PWR User Manual
Page 257
Chapter 73 Additional Commands
Ethernet Switch CLI Reference Guide
257
This example displays multicast VLAN configuration on the
Switch
.
The following table describes the labels in this screen.
This example shows the current status of Power over Ethernet.
The following table describes the labels in this screen.
Current
This field displays the current voltage at this power supply.
Max
This field displays the maximum voltage measured at this power supply.
Min
This field displays the minimum voltage measured at this power supply.
Threshold
This field displays the percentage tolerance within which the Switch still
works.
Status
Normal: The current voltage is within tolerance.
Error: The current voltage is outside tolerance.
sysname> show multicast vlan
Multicast Vlan Status
Index VID Type
----- ---- ----------
1 123 MVR
Table 156 show multicast vlan
LABEL
DESCRIPTION
Index
This field displays an entry number for the multicast VLAN.
VID
This field displays the multicast VLAN ID.
Type
This field displays what type of multicast VLAN this is.
MVR: This VLAN is a Multicast VLAN Registration (MVR).
Static: This VLAN is configured via IGMP snooping VLAN in fixed mode.
Dynamic: This VLAN is learned dynamically in auto mode.
See
for more information about IGMP snooping
VLAN and IGMP modes.
sysname# show poe-status
Total Power (W) : 185.0
Consuming Power (W) : 0.0
Allocated Power (W) : 0.0
Remaining Power (W) : 185.0
Table 157 show poe-status
LABEL
DESCRIPTION
Total Power
This field displays the total power the Switch can provide to PoE-enabled
devices.
Consuming Power
This field displays the amount of power the Switch is currently supplying to
the PoE-enabled devices.
Table 155 show hardware-monitor (continued)
LABEL
DESCRIPTION