Subnet-based vlan commands, 1 subnet-based vlan overview, 2 command summary – ZyXEL Communications ZyXEL Dimension ES-2024PWR User Manual
Page 213: Subnet-based vlan commands (213), See also
Ethernet Switch CLI Reference Guide
213
C
H A P T E R
60
Subnet-based VLAN Commands
Use these commands to configure subnet-based VLANs on the Switch.
60.1 Subnet-based VLAN Overview
Subnet-based VLANs allow you to group traffic based on the source IP subnet you specify.
This allows you to assign priority to traffic from the same IP subnet.
See also
for protocol-based VLAN commands and
for VLAN commands.
60.2 Command Summary
The following section lists the commands for this feature.
Table 125 subnet-based-vlan Command Summary
COMMAND
DESCRIPTION
M
P
show subnet-vlan
Displays subnet based VLAN settings on the Switch.
E
3
subnet-based-vlan
Enables subnet based VLAN on the Switch.
C
13
subnet-based-vlan dhcp-vlan-
override
Sets the Switch to force the DHCP clients to obtain their IP
addresses through the DHCP VLAN.
C
13
subnet-based-vlan name <name>
source-ip <ip> mask-bits <mask-
bits> vlan <vlan-id> priority
<0-7>
Specifies the name, IP address, subnet mask, VLAN ID of the
subnet based VLAN you want to configure along with the
priority you want to assign to the outgoing frames for this
VLAN.
C
13
subnet-based-vlan name <name>
source-ip <ip> mask-bits <mask-
bits> source-port <port> vlan
<vlan-id> priority <0-7>
Specifies the name, IP address, subnet mask, source-port
and VLAN ID of the subnet based VLAN you want to
configure along with the priority you want to assign to the
outgoing frames for this VLAN.
Note: Implementation on a per port basis is not
available on all models.
C
13
subnet-based-vlan name <name>
source-ip <ip> mask-bits <mask-
bits> vlan <vlan-id> priority
<0-7> inactive
Disables the specified subnet-based VLAN.
C
13
no subnet-based-vlan
Disables subnet-based VLAN on the Switch.
C
13