ZyXEL Communications ZyXEL Dimension ES-2024PWR - Manual (Page 164)

Chapter 43 OSPF Commands
Ethernet Switch CLI Reference Guide
164
no ip ospf authentication-same-aa Sets the routing domain not to use the
same OSPF authentication settings as the
area.
C 13
no ip ospf authentication-same-as-area Sets the routing domain not to use the
same OSPF authentication settings as the
area.
C 13
ip ospf cost <1-65535> Sets the OSPF cost in this routing domain. C 13
no ip ospf cost <1-65535> Resets the OSPF cost in the routing
domain to default.
C 13
ip ospf message-digest-key <key> Sets the OSPF authentication key in this
routing domain.
C 13
no ip ospf message-digest-key <key> Disables the routing domain from using a
security key in OSPF.
C 13
ip ospf priority <0-255> Sets the OSPF priority for the interface.
Setting this value to 0 means that this
router will not participate in router elections.
C 13
no ip ospf priority <0-255> Resets the OSPF priority for the interface. C 13
router ospf <router-id> Enables and enters the OSPF
configuration mode.
C 13
area <area-id> Enables and sets the area ID. C 13
no area <area-id> Removes the specified area. C 13
area <area-id> authentication Enables simple authentication for the area. C 13
area <area-id> authentication message-
digest Enables MD5 authentication for the area. C 13
no area <area-id> authentication Sets the area to use no authentication
(None).
C 13
area D> default-cost <0-16777214> Sets the cost to the area. C 13
no area <area-id> default-cost Sets the area to use the default cost (15). C 13
area <area-id> name <name> Sets a descriptive name for the area for
identification purposes.
C 13
area <area-id> stub Enables and sets the area as a stub area. C 13
no area <area-id> stub Disables stub network settings in the area. C 13
area <area-id> stub no-summary Sets the stub area not to send any LSA
(Link State Advertisement).
C 13
no area <area-id> stub no-summary Sets the area to send LSAs (Link State
Advertisements).
C 13
area <area-id> virtual-link <router-id> Sets the virtual link ID information for the
area.
C 13
no area <area-id> virtual-link <router-
id> Deletes the virtual link from the area. C 13
area <area-id> virtual-link <router-id>
authentication-key <key> Enables simple authentication and sets the
authentication key for the specified virtual
link in the area.
C 13
no area <area-id> virtual-link <router-
id> authentication-key Resets the authentication settings on this
virtual link.
C 13
Table 97 OSPF Command Summary (continued)
COMMAND DESCRIPTION M P