ZyXEL Communications ZyXEL Dimension ES-2024PWR - Manual (Page 105)

Ethernet Switch CLI Reference Guide
105
C
H A P T E R
23
IGMP Snooping Commands
Use these commands to configure IGMP snooping on the Switch.
23.1 Command Summary
The following section lists the commands for this feature.
Table 60 igmp-flush Command Summary
COMMAND DESCRIPTION M P
igmp-flush Removes all multicast group information. E 13
Table 61 igmp-snooping Command Summary
COMMAND DESCRIPTION M P
show igmp-snooping Displays global IGMP snooping settings. E 3
show multicast [vlan] Displays multicast status, including the port number, VLAN
ID and multicast group members on the Switch. Optionally,
displays the type of each multicast VLAN.
E 3
igmp-snooping Enables IGMP snooping. C 13
no igmp-snooping Disables IGMP snooping. C 13
igmp-snooping filtering Enables IGMP filtering on the Switch. Ports can only join
multicast groups specified in their IGMP filtering profile.
C 13
igmp-snooping filtering profile
<name> start-address <ip> end-
address <ip> Sets the range of multicast address(es) in a profile.
name: 1-32 alphanumeric characters C 13
no igmp-snooping filtering Disables IGMP filtering on the Switch. C 13
no igmp-snooping filtering profile
<name> Removes the specified IGMP filtering profile. You cannot
delete an IGMP filtering profile that is assigned to any
ports.
C 13
no igmp-snooping filtering profile
<name> start-address <ip> end-
address <ip> Clears the specified rule of the specified IGMP filtering
profile.
C 13
igmp-snooping 8021p-priority <0-7> Sets the 802.1p priority for outgoing igmp snooping
packets.
C 13
no igmp-snooping 8021p-priority Disables changing the priority of outgoing IGMP control
packets.
C 13
igmp-snooping host-timeout <1-
16711450> Sets the host timeout value. C 13
igmp-snooping leave-timeout <1-
16711450> Sets the leave timeout value C 13